LINE-X XS 100

Written by in Line-X, Product List on
LINE-X® STANDARD
At LINE-X, we know your equipment is valuable to you. It can be your workhorse or your plaything. Either way, it deserves serious protection every way you use it. That’s why the name LINE-X has become synonymous with toughness. For 20 years our LINE-X STANDARD Spray-On Bedliner has protected over 3 million trucks. When you’re looking for durability, function and affordability, LINE-X’s proven formula is what you need.

BASIC PHYSICAL PROPERTIES: All tests are performed by independent third-party material test laboratories:

    XS-100 TDS

   User Chart_XS 100

   XS-100 FIre & Burn Data

  FDA and USDA Certification_XS-100

  OCM Test Laboratories

  ISO 17025 Certified

  American Association for Laboratory Accreditation (A2LA)

  Truesdail Laboratories, Inc.

  Pira International Materials Test Lab

   For CHEMICAL RESISTANCES

      PER ASTM D543 FOR IMMERSION IN FLUIDS METHODS:

                                XS-100 TDS

 

 

Test Name                               Test Methods         Value

Hardness                                   Shore D ASTM       D2240 50±1

Coefficient of Friction            ASTM                       D1894

Static                                                                             0.546

Kinetic                                                                           0.185

Dielectric Const.                       ASTM                        D150 3.5

Dissipation Factor                    ASTM                        D150 0.026

Volume Resistance                   ASTM                        D257 2.4×1013 ohm.cm

DMA Test                                   ASTM                        D4065 -39°C (Loss Modulus, E” Tg)

Elongation                                 ASTM                         D412 91%

Flexural Strength                     ASTM                         D790 1,190 PSI

Flexural Modulus                    ASTM                          D790 0.024 MSI

Fungus Resistance                 MIL-STD                     810F      Pass

Pull-off Test-Adhesion          ASTM C297

To Metal –         No Primer 1,300

PSI To Metal – XPM Primer 1,750

PSI To Metal – LX SF-515 Primer 1,930

PSI Taber Abrasion (gm Loss/1000 cycles)

ASTM                           D4060 0.1525

Tear Strength                             ASTM                            D624 490 lbs/in

Tensile Strength                        ASTM                             D412 2,147 PSI

Water Vapor Trans.                  ASTM                             E96 0.796 Grains per hr. x

Methane Permeability              ASTM                             D1434 132 cc/m2 . Day

Safe Walking Surfaces              ASTM                             F1637.95

Dry .98

Wet .87

Salt Spray                                   ASTM                               B117 Rating 10 @ 3,000 hrs

Impact                                         ASTM                               D2794 134 in-lbs

Thermal Conductivity              ASTM                                E1952 .14 W/Km

ADDITIONAL PRODUCT CERTIFICATIONS:

 ANSI/NSF 61 – 5 (Barrier Material) Coatings for Water Tanks – Certified by Truesdail Laboratory -Only for XS-100 Natural Color

 USFDA Coatings for Incidental-Food-Contact Applications Certified by Keller and Heckman LLP

 MIL-STD-810F –Fungus Resistance

 

For CHEMICAL RESISTANCES

PER ASTM D543 FOR IMMERSION IN FLUIDS METHODS:

XS-100 TDS

 

Share